Outside Tap Installation Sheffield

Name: Sheffield Plumbers
Address: Sheffield, South Yorkshire, S1 2JE, GB
Telephone: 0114 303 4567

An outside tap is incredibly useful for watering the garden, washing the car, filling paddling pools, and cleaning tools. But it needs installing properly with an isolation valve inside so you can turn it off in winter, and frost-proof fittings so it doesn't burst when temperatures drop. In Sheffield's cold winters, unprotected outside taps freeze and crack, causing leaks inside the wall cavity.

We install outside taps by tapping off the kitchen cold supply, running pipe through the wall, and fitting a frost-resistant bib tap outside with a backplate. Inside, we fit an isolation valve so you can drain and turn off the tap before winter. Most installations take 2-3 hours including drilling through the wall and testing.

We operate across all Sheffield areas. No call-out fee. All outside tap installations carry a 12-month guarantee.

What's Included in Outside Tap Installation

Isolation valve inside

We fit a quarter-turn valve on the supply pipe inside. Turn it off in winter to prevent freezing. This is essential for frost protection.

Pipe run through wall

We drill through the external wall, run copper or plastic pipe to the outside location, and seal the hole to prevent drafts and water ingress.

Frost-resistant tap

We fit a bib tap with a backplate on the outside wall. The tap drains back when closed so water doesn't sit in the spout and freeze.

Testing

We test under full pressure, check for leaks at all joints, and show you how to isolate and drain the tap for winter.

Choosing the Right Location

1

Near the kitchen

Outside taps are usually fitted near the kitchen sink for easy connection to the cold supply. This minimises pipe runs and cost.

2

Convenient height

We fit taps at waist height for easy use. Too low and you're bending down with watering cans, too high and it splashes everywhere.

3

Avoid north-facing walls

North-facing taps get no sun and freeze more easily. If possible, choose a south or west-facing wall. If not, we'll fit extra insulation.

4

Check for obstacles

Make sure there's space for a bucket or hose connection under the tap. Don't site it where paving or walls block access.

Winter Protection

1

Turn off the isolation valve

Before the first frost, turn off the inside isolation valve. This stops water reaching the outside tap.

2

Open the outside tap

With the isolation closed, open the outside tap to drain any water left in the pipe. Leave it open all winter.

3

Insulate if needed

If the tap is on a north-facing wall or you forget to drain it, fit an insulated tap cover for extra protection.

4

Reopen in spring

Close the outside tap, reopen the isolation valve inside, check for leaks. You're ready for summer watering.

Outside Tap Installation Pricing

Upfront prices, no nasty surprises

We'll always tell you the cost before we start. These are typical price ranges, your exact quote depends on the job.

Service	Typical Cost
Standard outside tap installation	£120-£180
Long pipe run (5m+)	£180-£250
Second outside tap	£100-£150
Additional materials	£15-£75

All prices are estimated. Final costs depend on the specific job. We provide detailed quotes before starting work.

Common Questions

Got questions? Here's the quick answers.

How much does outside tap installation cost in Sheffield?

Standard installations near the kitchen cost £120-£180 across Sheffield and surrounding areas. Longer pipe runs or difficult access costs £180-£250. Adding a second tap costs £100-£150.

How long does outside tap installation take?

Most installations take 2-3 hours including drilling through the wall, running pipe, fitting the tap, and testing. Complex runs take longer, whether you're in City Centre, West Bridgford, or Beeston.

Will you make a mess drilling through my wall?

We use dustsheets and a vacuum attachment on the drill. We clean up debris and seal the hole properly. Minimal mess.

Can I fit an outside tap to a flat or rented property?

You'll need landlord permission for anything involving drilling external walls. Check your tenancy agreement first.

Do I need to turn off the outside tap in winter?

Yes, turn off the isolation valve inside and drain the tap. Frozen water in the tap or pipe can burst it, causing leaks inside the wall.

Can you fit the tap anywhere I want?

We'll advise on the best location based on access to the water supply. Very long runs or complex routes cost more and take longer.

What if I want two outside taps?

No problem. We run pipe to both locations from the same supply. Common for front and back gardens. The second tap costs less as we're already there.

Can I connect a hose permanently?

Yes, but disconnect it in winter. Hoses trap water that freezes and can damage the tap. We can fit a double check valve if you want permanent hose connection.

Will the tap reduce my water pressure inside?

No, it's just another outlet. Only if multiple taps run simultaneously will you notice reduced pressure, same as running any tap inside.

Back to General Plumbing

Get In Touch

Request a free quote

Tell us what you need and we'll get back to you with a no-obligation quote, usually within the hour during working hours.

0114 303 4567

Mon-Thurs 8:30am-6pm, Fri 9am-4pm

Covering all Sheffield postcodes

Need an outside tap? We'll fit it today.